 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MMV-110 Standard 1-channel 15 MHz Video Standard-size One-channel (IM) Video Transmission System The MMV-110 Standard is an Intensity Modulated (IM), LED-based fiber optic Video transmission system with Automatic Gain Control (AGC) and an LED status monitor. It is NTSC, PAL and SECAM compatible, ideal for the extension of a B&W or color CCTV camera. Video Audio System Design Data All of our units come in a Stand Alone, small Standard Module, or Insert Card version. The cards can be inserted into our 18 slot, 19" rack-mountable card cage (CC-18-80W) or one of our smaller Desk Top Card Racks (DTCR series). The DTCR series can handle one, two, four or seven cards, allowing for greater flexibility and future expansion. They can sit on a flat surface as a larger Stand Alone unit, or can be surface mounted with the flanges provided. Each one of our card housings operates with an appropriate power supply. The regulated switching power supply has short circuit protection, and an input operating voltage of 87-264 VAC. All MMV-110 Standard, Mini and Micro models are link compatible. Wavelength Suffix L0 Fiber Type 50 /125 62.5/125 Features * Multimode operation over one fiber * 15 MHz video bandwidth with AGC * True DC Restoration * Flat Frequency Response * Complies with RS-170, & 170A EIA video Sstandards * Compatible with NTSC, PAL, and SECAM video signals * No EMI or RFI and no ground loops * Stand Alone or Rack Mount * Ideal for CCTV camera extensions 865 q q 1310 1550 Type LED Mode MM Output Power -20 dBm -17 dBm Receiver Sensitivity -44 dBm -44 dBm Optical Loss Budget 24 dB 27 dB Range* 3 km 4 km Conn Type ST ST * Chromatic dispersion should be taken into account. 32 800-867-8426 * info@opticomm.com * www.opticomm.com * Contact factory for higher requirement. CCTV Security Networking Video Video in/out impedance Video in/out level Video bandwidth Differential gain Differential phase Linearity Tilt Compatibility Signal to noise ratio Connector type General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Vibration Shock 75 1 volt peak to peak, 1.5 volts max 10 Hz to 15 MHz @ -3dB < 1.5 % typical < 1.5 typical 1.1 % typical 0.5 % typical NTSC, PAL, SECAM, RS-170, RS-170A >67 dB using RS-250C standards @ 1 km BNC Selection Guide Digital Broadcast AM/IM Analog AM/IM Analog SWFM Analog Analog-to-Digital RGB Video Datacom 60 oz 11 oz Stand Alone (SA): 3.5" L x 2.3" W x 1.0" H Insert card (IC): 6.3" L x 0.8" W x 4.0" H -30 C to +60 C -55 C to +85 C 0 to 95% non-condensing 12 VDC (200 mA) or 24 VAC (300 mA) Up to 5 g's Up to 12 g's RF CATV Appendix Diagnostics Status monitoring LED indicator Opticomm reserves the right to change product specifications without notice. Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA Sample Configuration 33 |
Price & Availability of MMV-110
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |